FormaKit3D ES Open the app

Mate set

Base with custom holes for the thermos, mate, yerba and sugar containers, a straw holder, and yerba and sugar containers with snap lids and an engraved name.

Open in the app
Mate set

What it’s for

Everything for mate in a single set: an organizer base with recesses sized for the thermos, the mate gourd, the yerba container and the sugar bowl, with a bombilla holder, plus the yerba container and sugar bowl with snap-on lids and engraved names. The sugar bowl can have a slot for the spoon.

Ideas

  • Table or desk mate set for the office.
  • Base so the thermos and the mate don’t tip over in the car or the camper.
  • Personalized gift with the name on the lids.
  • Matching yerba container and sugar bowl, without the base.

Step by step

  1. Choose a preset: complete set, mate and yerba container, base for Stanley, just yerba container and sugar bowl, or mate and bombilla.
  2. In «What to print» choose which parts you want and the base layout.
  3. In «Sizes» enter the diameter of your thermos and your mate (measure them), and the size of the yerba container and sugar bowl.
  4. In «Finish» type the text for the lids and choose the font.
  5. Export: base, containers and lids come out as separate parts.

Tips

  • Measure the thermos at its base and the mate at the widest part that will sit inside the recess.
  • With 1.5 mm clearance the thermos and the mate go in and out without jamming; if they wobble, lower it.
  • For the yerba container, print the lid in one color and the text in another by changing filament at the engraving layer.
  • A 1 L Stanley thermos is about 100 mm at the base: use the «Base for Stanley» preset.

Presets

Full setCompact base with thermos, mate, bombilla, yerba container and sugar bowl.
Mate, straw and yerba containerBase in a row without thermos or sugar bowl.
Base for a 1 L StanleyBase with a 100 mm recess for a Stanley thermos, mate and bombilla.
Yerba and sugar containers onlyNo base: tall yerba container and sugar bowl with engraved lids.
Mate and straw (no thermos)Small base for the mate and the bombilla.

Parameters

What to print

Which parts of the set are generated and how the base is laid out.

Organizer baseYes / No

Prints the organizer base with the recesses for each item. Turn it off if you only want the yerba container and sugar bowl.

Default: Yes
Yerba containerYes / No

Prints the yerba container with its snap-on lid, and leaves its recess in the base.

Default: Yes
Sugar containerYes / No

Prints the sugar bowl with its snap-on lid, and leaves its recess in the base.

Default: Yes
Straw holder in the baseYes / No

Adds a bombilla holder in the base: a slanted hole to rest the bombilla when you’re not using it.

Default: Yes
LayoutOptions

«In a row»: all the recesses side by side (long, narrow base). «In two rows»: more compact, takes less table length.

In a rowIn two rows (compact)
Default: In two rows (compact)

Size

Sizes of your thermos and your mate, and size of the yerba container and sugar bowl.

Thermos diameterNumber

Diameter of your thermos, measured at the base. If you don’t want a thermos recess, turn off «Thermos in the base».

50 mm to 130 mmDefault: 90 mm
Thermos in the baseYes / No

Leaves a recess for the thermos in the base. Turn it off if you use a kettle or the thermos doesn’t fit.

Default: Yes
Mate diameterNumber

Diameter of your mate at the widest part that will sit inside the recess.

50 mm to 130 mmDefault: 80 mm
Yerba container diameterNumber

Diameter of the yerba container. 80–90 mm holds half a kilo of yerba with a height of 130 mm.

50 mm to 130 mmDefault: 85 mm
Yerba container heightNumber

Height of the yerba container without the lid. 130 mm with an 85 mm diameter holds half a kilo of yerba.

50 mm to 220 mmDefault: 130 mm
Sugar container diameterNumber

Diameter of the sugar bowl. 60–70 mm is comfortable for the spoon.

40 mm to 120 mmDefault: 65 mm
Sugar container heightNumber

Height of the sugar bowl without the lid. It’s best lower than the yerba container.

40 mm to 200 mmDefault: 90 mm
ClearanceNumber

Free space around the thermos and the mate in the base’s recesses. 1.5 mm goes in and out without jamming.

0.2 mm to 4 mmDefault: 1.5 mm

Finish

Lid text, spoon slot and lid fit.

Name engraved on the lidsYes / No

Engraves text on the lids of the yerba container and the sugar bowl.

Default: Yes
Yerba container textFree text

Text engraved on the yerba container’s lid. It can be «YERBA», your name or a brand.

Default: «YERBA»
Sugar container textFree text

Text engraved on the sugar bowl’s lid. It can be «AZÚCAR», «EDULCORANTE» or whatever you want.

Default: «AZÚCAR»
FontOptions

Font of the lid text. Condensed fits more letters; handwritten is more decorative.

Rounded (Nunito)Condensed (Oswald)Handwritten (Pacifico)
Default: Condensed (Oswald)
Spoon slot (sugar container)Yes / No

Makes a slot in the rim of the sugar bowl’s lid to leave the spoon inside with the lid on.

Default: Yes
Lid fitNumber

Play between the lids and the containers. 0.2–0.3 mm snaps shut firmly; raise it if they don’t go on.

0.05 mm to 0.6 mmDefault: 0.25 mm